loaded force [ info ] | [ args ] | [ none ] | [ m ] [ < mlength > ] This command is used to force media on the drum, whether or not media acutally exist on the drum. Gravure Japanese_Newspaper_OEM_Engine Lotem_400_Fiber_Head_Machine Lotem_800_Fiber_Head_Machine Lotem_Quantum Magnus_400 Magnus_800 Magnus_VLF Slave_MCE_Firmware Thermoflex Think_Motion_Controller Trendsetter_400/800 Trendsetter_NEWS Trendsetter_Series_4 The optional parameters work in the following manner: m <mlength> -> the mainscan length of the media to be loaded s <slength> -> the subscan length of the media to be loaded t <thickness> -> the thickness of the media to be loaded i <mediatype> -> the mediatype of the media to be loaded mi <media index> -> the media index of the media to be loaded pi <proof index> -> the proof index of the media to be loaded ms <media stacks>-> the number of media stacks to be loaded e <exit number> -> the default exit number to unload the media p <punch_group> -> the punch group to use if available r <rotate> -> whether the media is to be rotated on unload is <image side> -> the image side to be loaded rl <repeat len> -> the repeat length of the media to be loaded bay <bay_number> -> load using automatic hardware if available manual -> load using manual hardware if available carrier <proof_index> -> force a carrier of <proof_index> on drum receiver -> force a receiver on drum donor <media_index> -> force a donor of <media_index> on drum loc1 -> stack location is 1 loc2 -> stack location is 2 loc3 -> stack location is 3 loc4 -> stack location is 4 loc5 -> stack location is 5 loc6 -> stack location is 6 loc7 -> stack location is 7 loc8 -> stack location is 8 uauto -> the unload is specified to be automatic umanual -> the unload is specified to be manual info -> Used to provide more help for the loaded force command args -> Displays the current default arguments that will be used by the loaded force command This command is available. Field 24-Aug-2001 ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:24:56 2008 PST